October 19, 2021
The carton compression tester is the most direct test instrument for testing the compression strength of cartons or other packaging containers. It is used to determine the compression resistance of cartons and can be used for pressure stacking tests.
The results of the test can be used as an important reference for the height of the finished product packaging boxes in the factory or an important basis for the design of packaging boxes.
It is suitable for pressure resistance, deformation and stacking tests of corrugated boxes, honeycomb board boxes and other packaging parts.
And take into account the pressure test of plastic barrels (edible oil, mineral water), paper barrels, cartons, paper cans, container barrels (IBC barrels) and other containers.
How to maintain and maintain our carton compression testing machine?
1. Keep the instrument clean and tidy;
2. While keeping the instrument stable, don't shake it;
3. The operator should read the instruction manual and strictly abide by the operating procedures;
4. When the testing machine fails, please ask professionals to check and eliminate it, and do not run it with illness;
5. Persist in periodic verification and maintain the excellent technical status of the testing machine. The verification cycle is generally one year;
6. Intermittently lubricate the moving parts of the testing machine from time to time;
7. If it is not used for a long time, it should be tested several times before use to ensure the accuracy of the data;
8. When the printing paper roll is used up or the printing is illegible, the printing paper roll or printing ribbon should be replaced;
9. The drive chain of the carton compression testing machine should be refueled at the right time. When refueling, the tester can be tilted back to make the base upright, and brush on the chain at the bottom of the base with a brush dipped in oil. The oil should not be too much. Flow down as a degree;
10. When not in use for a long time, disconnect the power supply.
（Picture from the Internet）
Haida International is a national high-tech enterprise engaged in the design, research and development, production, sales, measurement and after-sales service of testing equipment such as packaging industry, household industry, material mechanics, optical measurement, baby toy scooters, environmental reliability testing, etc.
Dongguan Haida Instrument Co., Ltd. website: http://www.hdtester.cn